Every repipe we quote covers detection, new materials, installation, testing, and cleanup. Here is what is in the job, so you know exactly what you are paying for before we start.
We use acoustic leak detection equipment, a thermal imaging camera, and a pressure testing gauge to confirm the leak location and how much water is being lost. You get the findings in plain language before we quote the repipe.
We install Uponor PEX pipe or copper pipe with SharkBite and Mueller fittings, sized to your fixture count and water pressure. Materials are IAPMO-certified and matched to Florida Plumbing Code requirements for your home.
The failed under-slab line gets capped at the main and taken out of service. That stops the water loss immediately and removes the failure point from your system permanently.
Before we close any wall or patch any floor, we pressurize the new system and hold it to confirm zero drop. You see the gauge reading and the test result, not just a verbal okay.
We patch access openings with concrete patch and drywall so the house looks finished when we leave. Paint touch-up is on you, but the structural repair is on us.
Our repipe work carries a written warranty on both materials and labor. If a fitting we installed fails, we come back and fix it. That warranty transfers with the house at resale.
A slab leak repipe Fort Pierce FL is a plumbing procedure that replaces the water lines running beneath your concrete foundation with new pipe routed above the slab, usually through the attic or interior walls. Instead of jackhammering your floor to chase one leak, we abandon the old under-slab line and build a new, accessible water path. That means no more concrete saws in your living room and no more guessing which section fails next.
Fort Pierce homes built from the 1950s through the 1980s often still have original copper under the slab, and our sandy soil plus humid summers speed up corrosion. We see pinhole leaks in copper pipes, hot spots on the floor, and the sound of running water under the floor even when every fixture is off. If you have already paid for two or three spot repairs, a whole home repipe for slab leak Fort Pierce FL is usually the cheaper path forward.
We keep the process predictable: find it, plan the route, run new pipe, test it, and clean up. Here is what you experience from the first call to the final walkthrough.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Acoustic leak detection equipment
Picks up the sound of pressurized water escaping under concrete so we can pinpoint the leak without exploratory demolition.
Thermal imaging camera
Reads temperature differences on the floor to find hot water slab leaks and confirm the line path before we cut anything.
Pressure testing gauge
Measures system pressure drop at the meter to confirm the leak and verify the new system holds after install.
Video pipe inspection camera
Lets us look inside drain and supply lines to check for corrosion, scale, and damage we cannot see from outside.
RIDGID and Milwaukee pipe tools
Cut, crimp, and press fittings cleanly on PEX and copper so every connection meets code and holds pressure.
Fluke meters and General Pipe Cleaners equipment
Used for electrical verification on water heater circuits and for clearing lines when a repipe uncovers a blocked branch.
Concrete saw and jackhammer
Reserved for the rare case where a small floor opening is the fastest path, and used with dust control and clean patching afterward.
Above-slab rerouting
We route new PEX or copper through the attic or interior walls so future service never requires breaking concrete. This is the standard approach for a whole home repipe for slab leak Fort Pierce FL job and it protects your flooring.
Pressure-hold verification
Every repipe is pressurized and held before we close walls. If the gauge moves, we find the fitting and fix it before you ever see the finished wall.
Florida Plumbing Code compliance
We size lines, support pipe, and install backflow protection to Florida Plumbing Code. Permits are pulled where required, and inspections are scheduled as part of the job.
Material matching
When part of a system stays in service, we match material and diameter so flow stays balanced. Mixing copper pipe and PEX pipe incorrectly can cause electrolysis, so we use dielectric fittings where the two meet.
Epoxy pipe lining evaluation
For some commercial slabs, epoxy pipe lining is a lower-disruption option than a full repipe. We evaluate it honestly and only recommend it when the existing pipe can support it.
01
What we do: We map the whole system, confirm the copper is failing in multiple spots, and repipe with PEX through the attic. The old line is capped at the main and abandoned.
→ No more concrete cuts, no more leak calls, and full pressure restored to both bathrooms and the kitchen.
02
What we do: We isolate a hot water slab leak, then repipe the hot side through interior walls and the attic. Cold lines are tested and left in place because they still hold pressure.
→ Upstairs pressure is back to normal, the bill drops, and the homeowner avoids tearing up the downstairs tile.
03
What we do: Thermal imaging confirms a hot water line leak. We repipe the hot and cold runs together since the house is already opened up, and we check for foundation water damage while we are in there.
→ Floors are cool, the musty smell clears within a week, and the whole system is warrantied.
04
What we do: We repipe both affected units with Uponor PEX, working around tenants and keeping water on during the day. Permits are pulled for the multi-unit work.
→ Both units are leak-free, tenants stayed in place, and the owner stopped losing rent to emergency repairs.
Fort Pierce sits on sandy soil with a high water table, and that combination is hard on under-slab pipe. Copper installed in the 1960s and 1970s has had decades of warm, slightly acidic water running through it, and pinhole leaks in copper pipes are common by the time a house hits 40 years old. Add our humid summers and the soil movement that comes with them, and you get the pattern we see every week: one leak, then another six months later. For older homes, repipe under slab Fort Pierce FL work usually means abandoning the original line entirely and routing new PEX through the attic. We pull permits through St. Lucie County where required, and we schedule inspections so the job closes clean. If you are searching for slab leak repipe Fort Pierce FL same day service, call before noon and we can usually get a tech out the same day to confirm the leak and quote the repipe.
Downtown Fort Pierce
Historic homes here often have original copper and pier-and-beam sections mixed with slab, so routing new lines takes a careful walkthrough before we quote.
South Hutchinson Island
Salt air and higher humidity speed up corrosion on exterior fittings, so we spec corrosion-resistant materials on island repipes.
Lakewood Park
Many 1970s ranches here have single-bath layouts that repipe quickly, often in a single day with attic routing.
Lincoln Park
Older block homes with limited attic space sometimes need interior wall routing, which we plan around to keep drywall cuts small.
Orange Avenue District
Mixed residential and commercial blocks mean we often coordinate repipes around business hours and tenant schedules.
High water table and sandy soil
Water moves easily under a slab here, so a small leak can spread and cause foundation water damage faster than in clay-heavy areas. We treat every confirmed leak as time-sensitive.
Humid summers and warm groundwater
Warm, humid conditions accelerate corrosion inside copper pipe. Homes on the island and near the Indian River tend to fail sooner than inland properties.
Aging 1950s-1980s housing stock
Original copper in these homes is past its expected service life. We quote repipes more often than spot repairs in this age range because the whole line is tired.
Seasonal winter visitor occupancy
Homes that sit empty part of the year can develop leaks unnoticed. We recommend a pressure check before the season starts so you are not surprised by a high water bill.
Most of our repipe calls start with one of these four symptoms. If any of them sound familiar, the under-slab line is the likely culprit.
Problem
A slab leak can add hundreds of gallons a day to your bill and quietly undermine the soil under your foundation.
Our Fix
We isolate the leak with electronic leak detection and pressure testing gauge readings, then quote a repipe that removes the failing line entirely. Most customers see the bill normalize the first full cycle after the repipe.
Problem
That sound means water is moving under your slab right now, and it will not stop on its own. Left alone, it can reach baseboards and feed mold growth from slab leaks.
Our Fix
We confirm the location with acoustic leak detection equipment and a video pipe inspection camera, then repipe the line above the slab so it can be serviced without breaking concrete again.
Problem
Warm patches usually mean a hot water line is leaking under the slab. The heat accelerates corrosion, so the next failure is usually close behind.
Our Fix
We trace the hot water run, cap it at the main, and repipe with PEX pipe or copper pipe routed through the attic. Floors return to normal temperature within a day of the repipe.
Problem
Every spot repair means another cut into your floor and another few thousand dollars. If you have had two or more, the whole line is telling you it is done.
Our Fix
We quote a whole home repipe for slab leak Fort Pierce FL work and show you the math against another round of spot repairs. In most cases the repipe pays for itself within two avoided repairs.
Spot repairs fix one failure point. A repipe removes the whole failing system from under your foundation, so you stop paying for the same problem twice.
Stop repeat leak calls
Copper that has failed once under a Fort Pierce slab has usually failed in three or four other spots you cannot see yet. Repiping retires the entire line instead of chasing pinhole leaks in copper pipes one at a time. Most customers who repipe go years without another under-slab call.
Cut the water bill
A slab leak can push a residential water bill from $60 a month to $300 or more before you notice. Once we cap the old line and pressurize the new one, that loss stops the same day. You get a pressure testing gauge reading at the meter to confirm it.
Protect the foundation
Water under a slab softens soil, shifts support, and feeds mold growth from slab leaks inside walls and baseboards. Repiping removes the source instead of drying it out and waiting. We also check for foundation water damage before we quote the job.
Restore full water pressure
Corroded copper narrows from the inside, so showers weaken and fixtures dribble. New PEX pipe or copper pipe restores full flow to every fixture in the house. Customers in 34950 and 34982 regularly tell us the difference is obvious on the first shower.
Typical 2026 pricing in this area runs $4,500 to $12,000 for a whole-home repipe and $2,800 to $5,500 for a single-line under-slab repipe. The number depends on house size, fixture count, routing path, and whether we are working with PEX or copper. We quote after we see the layout, and the price we give you is the price you pay. If you want to compare options, ask us for a whole house repipe for slab leak in Fort Pierce FL cost breakdown and we will show you the math.
Typical Investment Range
$2,800 - $12,000 depending on scope
A repipe costs more than a spot repair on day one, but it ends the cycle. Two avoided spot repairs usually cover the difference, and you get a warrantied system that adds value at resale.
What changes the price
House size and fixture count
A two-bath, 1,200-square-foot home repipes faster and cheaper than a four-bath, 2,800-square-foot home. Every fixture adds a run, a fitting, and test time.
Routing path
Attic routing is usually the fastest and least invasive. Interior wall routing adds drywall work and time, which raises the labor portion of the quote.
PEX vs. copper
PEX costs less in material and installs faster. Copper costs more but matches original systems and some homeowners prefer it. We quote both so you can choose.
Access and attic conditions
Low attics, tight crawlspaces, and finished ceilings slow the crew down. We flag these on the walkthrough so the quote reflects real conditions.
Permits and inspections
St. Lucie County permits and inspections are part of the job on most repipes. We handle the paperwork and build the fee into the quote.
Drywall and concrete patch
Small access openings are included. Larger repairs, like replacing a full ceiling section, are quoted separately so you are not paying for work you do not need.
Google ★★★★★4.9
Confirmed the slab leak with a thermal camera in under 30 minutes and quoted the repipe the same visit. Two-day job, PEX through the attic, pressure-tested before they closed up. Water bill is back to normal.
Yelp ★★★★★4.8
We had two leaks in three years on original copper. They explained why repiping made more sense than another spot repair and did not push us. Clean work, drywall patched, and the warranty is in writing.
BBB ★★★★★4.9
Managed a repipe on our fourplex with tenants in place. Kept water on during the day, worked around schedules, and finished in three days. Permits were pulled and closed without us chasing anything.
Our technicians hold Florida licensed plumber credentials, including Master Plumber License and Journeyman Plumber License holders, plus Backflow Prevention Certification and OSHA safety training. We carry IAPMO certification on the materials we install, which matters when your insurance adjuster asks what went under the slab. We have run repipes in Fort Pierce bungalows, 1970s ranches, and newer island builds, and we know how each one is framed. Every job is permitted and inspected where the code requires it, and we stand behind the work with a written warranty.
Real experiences from customers who chose our Slab Leak Repipe services.
“Third slab leak in four years on the same copper line, so I finally repiped. The crew ran PEX through the attic, capped the old line, and pressure-tested everything before they left. Water bill dropped from $280 back to $70 the next cycle. Should have done this two leaks ago.”
Marcus D.
Homeowner, Fort Pierce
“We had hot spots on the floor in the hallway and could not figure out why. They used a thermal imaging camera and found the hot water line in about 20 minutes. Repipe took two days, they patched the drywall, and the floors are cool again. Clean work, no mess left behind.”
Elena R.
Homeowner, South Hutchinson Island
“We manage a 1970s fourplex off Orange Avenue with original copper. Two units had slab leaks in the same year, so we repiped both. They worked around tenants, kept water on during the day, and finished in three days. No leaks since, and the pressure upstairs is finally normal.”
Dwayne P.
Property Manager, Downtown Fort Pierce
Real answers to the questions we hear most often from local homeowners and property managers.
When water is actively running under your floor at 2 a.m., we shut it down fast. Emergency slab leak repair stops the loss, then we schedule the repipe once the house is stable.
View Emergency Slab Leak RepairSometimes one section is worth saving. Under slab pipe repair targets a single failed run when the rest of the system still tests clean, and we tell you honestly when repiping is the better call.
View Under Slab Pipe RepairSpot repair is the smallest fix: open the floor, cut out the failed section, and replace it. It works for isolated pinhole leaks in copper pipes, but we flag it when a pattern is forming.
View Slab Leak Spot RepairRerouting moves a single line above the slab without replacing the whole system. It is a middle path between spot repair and a full repipe, and it works well when one fixture keeps leaking.
View Slab Leak Pipe ReroutingHot water lines fail faster because heat accelerates corrosion. If your floor has hot spots on floor surfaces, that is a hot water slab leak, and we handle it with the same detection gear.
View Hot Water Slab Leak RepairCold water leaks are quieter and often show up as a high water bill first. We trace them with electronic leak detection and pressure testing gauge readings before recommending a fix.
View Cold Water Slab Leak RepairReach us any hour at (772) 362-4143. We answer live, give you a real arrival window, and dispatch a licensed plumber to your Fort Pierce address. Same-day appointments are usually available, and emergency calls go out 24/7.
Phone
+17723624143Address
5550 S US Hwy 1, Fort Pierce, FL 34982, USA
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available
